HOME > Products > DC DC Power Supply > Module, Others: DC DC Power Supply > 40W PDG40-48S

Quantity:
40W PDG40-48S

Description:
1. Approved to IEC/ EN60950, UL60950 safety standards.
2. Industry standard footprint: 2" x 2" x 0.38 " ( 50.8 x 50.8 x 9.66mm3).
3. Typical efficiency: 89%.
4. Wide input voltage: 36 - 75V.
5. Single output: 3.3V, 5V.
6. Trim function.
7. No minimum load requirement.
8. Basic isolation.

Specification:
1. Electrical specifications:
(1) Input range: 36 - 75Vdc.
(2) Output voltage setpoint accuracy: ± 1.0% Vo max.
(3) Voltage adjust: 90% to 110% Vo.
(4) Line regulation: 0.2% Vo max.
(5) Load regulation: 0.5%Vo max.
(6) Ripple and noise: < 75 mVpp max.
(7) Transient response: 200mV max.
(8) Recovery: < 200uS max. ( 25% step load change from 50% Io)
(9) DI / DT: 1A / 10uS.
2. Environment:
(1) Operating ambient temperature range: -40°C to 55°C.
(2) Operating case temperature range: -40°C to 100°C.
(3) Storage temperature: -55°C to 125°C.
(4) Temp. coefficient: < ± 0.02%/ °C.
(5) MTBF: > 2 million hrs.
3. Control.
(1) Positive logic:
High = on: 3.5 to 10Vdc.
Low = off: - 0.7 to 1.5Vdc.
(3) Negtive logic:
Low = on: - 0.7 to 1.5Vdc.
High = off: 3.5 to 10Vdc.
(4) Control: 2mA max. ( for positive logic), 4mA max. ( for negative logic).